What are the key points of daily maintenance of Label Flexo Printing Machine?

Daily maintenance of Label Flexo Printing Machine is the key to ensure its efficient, stable operation and extend its service life. The following are some main points of daily maintenance:

Cleaning work:

Regularly clean various parts of the printing machine, including printing roller, anilox roller, scraper, ink tank, plate, etc., to remove ink residue and impurities to prevent clogging and corrosion.
Use appropriate cleaning agents and tools to avoid damage to the equipment.

Check and adjust the tension:

Ensure that the tension of paper or film during transmission is uniform and stable to avoid wrinkling, breakage and other problems caused by uneven tension.
Regularly check and adjust the tension control system to ensure its accuracy.

Lubrication and maintenance:

Regularly lubricate the transmission parts, bearings, chains, etc. of the Label Flexo Printing Machine to reduce wear and noise.
Check the amount and quality of lubricating oil or grease, and replenish or replace it in time.

Electrical system inspection:

Regularly check the electrical system, including motors, cables, terminals, control panels, etc., to ensure that the electrical connections are firm and there is no short circuit or open circuit.
Clean electrical components to prevent dust and dirt accumulation and cause failures.

Mechanical parts inspection:

Inspect the wear of the transmission system, gears, bearings and other mechanical parts of the printing press, and replace the seriously worn parts in time.
Inspect and adjust the gap and position of each part to ensure the accuracy and stability of the equipment.

Maintenance of plate and anilox roller:

Clean and inspect the plate regularly to ensure that its surface is flat and undamaged to obtain good printing effect.
Check the number of screen lines and cell opening of the anilox roller to ensure that it meets the printing requirements, and clean the anilox roller regularly to prevent blockage.

Safety device inspection:

Regularly check the safety devices of the printing press, such as emergency stop buttons, protective covers, etc., to ensure that they are intact and can work normally.
Strengthen the safety awareness training of employees to ensure that safety regulations are followed during operation.

Record and tracking:

Establish equipment maintenance records, and record in detail the content, time, maintenance personnel and other information of each maintenance.
Track the operating status and failure of the equipment, analyze the cause of the failure and take corresponding preventive measures.

Training and guidance:

Regularly train and guide operators to improve their operating skills and troubleshooting capabilities.
Encourage operators to actively participate in the daily maintenance of equipment and create a good atmosphere of full participation.