What do I need to pay attention to the routine maintenance of Label Flexo Printing Machine?

The routine maintenance of Label Flexo Printing Machine is very important to ensure the normal operation and prolong the service life of the machine. The following are some of the routine maintenance matters needing attention:

1. Cleaning

After each use, Label Flexo Printing Machine should be cleaned in a timely manner in all parts of the Label Flexo Printing Machine, including the plate cylinder, impression cylinder, anilox rollers, ink tanks and so on. Use a clean wet cloth or special cleaner to wipe to remove residual ink and impurities.
Regularly clean the casing and surroundings of the equipment to keep it tidy and prevent dust and debris from entering the interior of the machine.
Pay attention to cleaning the ink circuit system, including ink pumps, ink tubes, filters, etc., to prevent ink clogging and precipitation.

2. Lubrication

Regularly lubricate the various moving parts of Label Flexo Printing Machine, such as bearings, gears, chains, etc., in accordance with the requirements of the equipment manual. Use the appropriate lubricant or grease to ensure lubrication.
Pay attention to the amount of lubrication should not be too much or too little, too much will lead to oil contamination of printed materials, too little will not play a good lubrication.

3. The inspection

Every day before starting the machine, should check whether all parts of the equipment is normal, such as the electrical system, mechanical transmission system, air pressure system. Ensure that the equipment is trouble-free before starting the machine.
Regularly check the wear and tear of the printing plate, and replace it in time if there is any wear and tear.  
At the same time, check whether the installation of the printing plate is firm to prevent loosening in the printing process.
Check the surface condition of the anilox rollers, if there is any damage or wear it should be repaired or replaced in time. Ensure that the anilox rollers have good ink transfer performance.
Check whether the safety devices of the equipment are intact, such as the emergency stop button, protective cover, etc.. Ensure the safety of the operator.

4. The adjustment

Regularly adjust the parameters of Label Flexo Printing Machine such as pressure, speed, tension, etc. according to the requirements of printed materials. Ensure that the printing quality is stable.
Note that the magnitude of the adjustment should not be too large, so as not to affect the performance and life of the equipment. At the same time, adjustments should be made after the test print to check whether the printing effect meets the requirements.

5. Other aspects

Operators should familiarize themselves with the operating procedures and maintenance requirements of the equipment, and operate and maintain it in strict accordance with the regulations.
Regularly carry out comprehensive inspection and maintenance of the equipment, such as replacing wearing parts, checking the electrical wiring and so on.
Keep the working environment of the equipment clean, dry and well ventilated, avoid direct sunlight and humidity.
When carrying out maintenance on the equipment, use original parts or reliable quality substitutes to ensure the quality of maintenance.